September 2019

Super Pellet Pump User Guide

Step 1: Remove plunger and add any quantity of pellets up to the line marked 'Max. Pellets' Step 2: Replace plunger and push down until the pellets are lightly compressed, ensure locking collar is securely in place. Step 3: Flip open the seal cap and by retracting the plunger, draw water up to the line marked "Max. Water'

Step by Step User Guide:

Step 1: Remove plunger and add any quantity of pellets up to the line marked 'Max. Pellets'

Pellet-Pump-Seq1.jpg

Step 2: Replace plunger and push down until the pellets are lightly compressed, ensure locking collar is securely in place.

Pellet-Pump-Seq2.jpg

Step 3: Flip open the seal cap and by retracting the plunger, draw water up to the line marked "Max. Water'

Pellet-Pump-Seq3.jpg

Step 4: There will be a small amount of air between the plunger and the water line, push this excess air out of the pump.

Pellet-Pump-Seq4.jpg

Step 5: Close the seal cap with your thumb and pull the plunger up to the top, repeating 3-5 times to ensure that all pellets have sunk

Pellet-Pump-Seq5.jpg

Step 6: Open the seal cap to allow air back in to the pump

Pellet-Pump-Seq6.jpg

Step 7: Unlock the locking collar, remove the plunger fully and empty contents into a bait box where the now sinking pellets can soften fully in water

Pellet-Pump-Seq7.jpg

The Super Pump is perfect for 2mm, 4mm and 6mm expander pellets

Related Articles
August 2019
Catch Quality On The River
March 2020
Dave Brown - Shallow Canal Masterclass!!
October 2021
Des Shipp
Des' Five Banjo XR Tips
October 2021
Des Shipp
Fill In The Blanks
April 2020
Margin Method!
April 2021
Preston 2021 Gear Guide
March 2020
Springtime Bagging!
October 2021
The Commercial Fishery Blueprint!
October 2021
Des Shipp
Try Something New